|
|
|
|
Includes: 1 Custom Cut & Predrilled REAR Tilt Bar. You must specify 2 specs:
- How many holes
- Distance between Center of Holes, 2 7/8", 3.00", 3 1/8"
* See table below for proposed bar length based on 2 specs above * Spacing between the last hole & end of rod is: 1/2"*Distance between Center of Holes | *Number of Holes | *Total length = distance between 1st & Last hole + 1.0" (half inch from last hole to end of bar x 2) | 2.875" | 6 | 14 3/8" + 1 = 15 3/8" | 2.875" | 7 | 16 7/8" + 1 = 17 7/8" | 2.875" | 8 | 20.00" + 1 = 21.00" | 2.875" | 9 | 22 7/8" + 1 = 23 7/8" | 2.875" | 10 | 25 1/4" +1 = 26 1/4" | 2.875" | 11 | 28 3/4" +1 = 29 3/4" | 2.875" | 12 | 31 5/8" +1 = 32 5/8" |
*Distance between Center of Holes | *Number of Holes | *Total length= distance between 1st & last hole + 1.0" (half inch from last hole to end of bar x 2) | 3.00" | 6 | 15.00" + 1 = 16.00" | 3.00" | 7 | 18.00" + 1 = 19.00" | 3.00" | 8 | 21.00" +1 = 22.00" | 3.00" | 9 | 24.00" +1 = 25.00" | 3.00" | 10 | 27.00" +1 = 28.00" | 3.00" | 11 | 30.00" +1 = 31.00" | 3.00" | 12 | 33.00" +1 = 34.00" |
*Distance between Center of Holes | *Number of Holes | *Total Length= distance between 1st & last hole + 1.0" (half inch from last hole to end of bar x 2) | 3.125" | 6 | 15 5/8" + 1 = 16 5/8" | 3.125" | 7 | 18 3/4" + 1 = 19 3/4" | 3.125" | 8 | 21 7/8" + 1 = 22 7/8" | 3.125" | 9 | 25.00 + 1 = 26.00" | 3.125" | 10 | 28 1/8" +1 = 29 1/8" | 3.125" | 11 | 31 1/4" + 1 = 32 1/4" | 3.125" | 12 | 34 3/8" + 1 = 35 3/8" |
Price is $22 for shutter rod up to 8 holes. Price is $25 for shutter rod between 9 or 10 holes Price is $28 for shutter rod between 11 or 12 holes - Holes are Predrilled with 13/64" drill bit size. You can make the hole slightly bigger with a bigger drill bit if needed to make the insertion easier.
- Slim REAR Tilt Bar, rectangle shape, Vinyl, Off white
- Commonly used in Vinyl, Polysatin, Hunter Douglas Palm Beach,
- Use with cufflink connectors, part #1558, sold separately
|
|
|
|
|
|
|